Yonker 7inch Display 3 Channel ECG Machine With Touch Screen YK-ECG

Short Description:

  • Input circuit Floating, Protection against defibrillator effect
  • Voltage tolerance:±500m V
  • Time constant:>3.2s
  • Frequent response: 0.05Hz~150Hz
  • Input Impedance: >50MΩ
  • Input Circuit Current: ≤ 0.1µ A
  • Patient Auxiliary Current:: < 10µ A (220V-240V/50Hz)
  • CMRR: ≥ 100dB, with AC Filter
  • A/D Resolution A/D: 12bits/1000HZ
  • Acquisition Mode: Simultaneously acquisition of 12 lead, full
  • screen display of 12 channel ECG waveforms.
  • Sensitivity:5,10,20mm/mV

Feature ECG 3

  • Modern in design, light in weight, compact in size.
  • Simultaneously acquisition of 12 lead, full screen display of 12 channel ECG waveforms. 7” color screen, both push-button and touch operation (optional).
  • Sensitive filters of ADS, HUM, and EMG.
  • Automatic measurement, calculation, analysis, waveform freezing. Auto-analyze and auto-diagnostic can reduce doctor’s burden and improve working efficiency.
  • Automatic adjustment of baseline for optimal recording.
  • Thermal printer with 80mm print paper, synchronization print.
  • Lead off detection function.
  • Built-in rechargeable li-ion battery (12V/2000mAh), AC/DC power conversion. Adapt to 100-240V, 50/60Hz AC power supply.
  • Historical data and patient’s information can be reviewed and printed. The machine can store over 500 ECG reports in its built-in flash.
  • USB communication interfaces (optional


Functions are as follows: recording and display-ing ECG waveforms in auto/manual mode; auto-measuring and auto-diagnosing the ECG wave parameters; save patient data into machine, USB driver automatically(optional), prompting the state of lead off.

  • Color TFT display
  • The high resolution hot array output system is adopted
  • The electrode with bad contact can be accurately determined and the corresponding position can be
  • The design conforms to the IECI type CF safety standard, and the ECG amplifier is fully floated
  • A flexible output print format
  • Standard external input output interface and RS-232 communication interfac
  • 3 or 6 or 12 lead synchronous acquisition, synchronous amplification, three frack record
  • The daily consumables are greatly saved